Description
FLEX: hard
HIGHBACK
– W-Props Highback: Two rods running on the back improve the torsion performance and support of the highback. A sliding cushion on the inner upper part keeps the boot flexible. Realizes the response, support and freedom required for carving at a high level.
– Super carbon blend: Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.
– Redux Lean Adjuster: Lighter weight due to smaller size. Easy adjustment with one action.
– Micro Adjuster: If you move it forward by 1 memory, it will tilt forward about 2.5 degrees. More detailed high back setting is possible.
– Slide plate: A material with low friction is placed so as not to hinder the lateral flex of the boot.
BASEPLATE
– Transfer Baseplate: Power is reliably transmitted to the impact point, lightweight and direct response.
– Super carbon blend: Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.
– Boost Footon: A footbed with a 4mm higher cushion than the conventional FootOn. It prevents drag during turns and absorbs fine vibrations while improving response when turning. Of course, the surface is made of a material that does not easily adhere snow.
– Adjustable Toe & Heel Cushion: Movable cushion that can be adjusted toe side and heel site according to boot size and board width.
– Super carbon blend: Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.
STRAP
– Waffle Strap: A two-layer structure consisting of a waffle cushion with a comfortable hold and ease of movement that makes you forget you’re wearing it, and a Power Strap that transmits power directly.
– Beer Buckle: Newly designed ratchet buckle that securely tightens until the last tightening. Equipped with a bottle opener function that you don’t have to worry about when toasting.
– FTM VER.5.0: In order to increase the transmission of power, the center line is strong, and the upper and lower ends are more flexible to enhance the fit with the boots.
– L-GuideThe belt can be stored smoothly to avoid getting caught in the snow during toeside turns.
– UU Fit: By attaching a strap belt between the heel cup and the highback, the system wraps the boots from 360 degrees. This realizes a natural hold feeling and equalization of pressure.
additional features:
– Multi Disc: A multi-disc that can be attached to either 4×4 or 2H. It is also possible to install with a 5mm or 10mm shift in the front and back or left and right.
– Titanium Screw: A mounting screw that achieves 50% weight reduction and further strength by compounding titanium alloy. The XV also uses titanium for the straps and highback mounting screws.
– Carbon Disc: A special carbon-blended rotary disc leads to another dimension of movement and response.