Flux CV Gray (2024)

Description

Flex: medium

HIGHBACK

– Buffalo Highback: It features two pillars that look like buffalo horns. Supports the flat highback surface from both sides. This term, the thickness of the two pillars has been increased, making it a shape that transmits power to the board more directly.

– Super tough nylon: Medium flex material for all-round use from low speed to high speed, beginner to expert.

– Redux Lean Adjuster: Lighter weight due to smaller size. Easy adjustment with one action.

– Micro Adjuster: If you move it forward by 1 memory, it will tilt forward about 2.5 degrees. More detailed high back setting is possible.

BASEPLATE

– Super Transfer Baseplate: Thanks to the heel cup, which is about 15mm higher than the transfer base, the backside response is incomparable. Also, it is difficult to drag.

– Performance Blend: Medium flex for the most all-round use. It corresponds to every riding scene.

– Boost Foot On: A footbed with a 4mm higher cushion than the conventional FootOn. It prevents drag during turns and absorbs fine vibrations while improving response when turning. Of course, the surface is made of a material that does not easily adhere snow.

– Adjustable Toe & Heel Cushion: Movable cushion that can be adjusted toe side and heel site according to boot size and board width.

– 4 Corner Stabilizer: The powerful power generated by the high heel cup is firmly and gently transferred to the board by the stabilizer.

– 5 Holes High back rotation: Five high back mounting holes that allow rotation at both feet forward swing angles.

– Super tough nylon: Medium flex material for all-round use from low speed to high speed, beginner to expert.

STRAP

– Waffle Strap: A two-layer structure consisting of a waffle cushion with a comfortable hold and ease of movement that makes you forget you’re wearing it, and a Power Strap that provides direct power transmission.

– Beer Buckle: Newly designed ratchet buckle that securely tightens until the last tightening. Equipped with a bottle opener function that you don’t have to worry about when toasting.

– FTM VER.5.0: In order to increase the transmission of power, the center line is strengthened, and the upper and lower ends are made more flexible to enhance the fit with the boots.

– L-Guide: The belt can be stored smoothly to avoid getting caught in the snow during toeside turns.

– UU Fit: By attaching a strap belt between the heel cup and high back, the system wraps around the boot from 360 degrees. This realizes a natural hold feeling and equalization of pressure.

additional features:

– Multi Disc: A multi-disc that can be attached to either 4×4 or 2H. It is also possible to install with a 5mm or 10mm shift in the front and back or left and right.

– Toolless Lever: The best setting is possible without tools. Comes with a stopper to prevent screws from loosening.